RF4B-3CH-11 RF controller is an advanced micro control unit that is used for controlling a variety of lamps that have a source of light that is LED. For instance: point source of light, flexible light strips, wall washer lamps, glass curtain wall lights and so on. At the same time, it has many advantages such as convenient connection, simplicity to use and more. According to the actual needs of customers, it can carry out fast changing, gradual change etc.
Technical parameters
- Working temperature: -20-60C
- Supply voltage: DC5V, 12V, 18V, 24V (for orders specify voltage)
- Output: 3 channels
- Connecting mode: common anode
- Launch reception frequency: 315 Mhz
- External dimension: L88 Χ W45 Χ H26 mm
- Packing Size: L160 Χ W95 Χ H51 mm
- Net weight: 160g
- Gross weight: 195g
- Static power consumption: <1 W
- Output current: <4 A (each channel)
- Output power: 5 V: <60W, 12V: <144W, 24V: <288W
RF6BIC-83mode ( Non-DMX Controller for Color Chasing Ribbon Flex ) This controller is designed for led products which use HL1606 as its driver. It has 128*128*128 grayscale, length setup funtion and power-fail memory function. You could choose its function freely, or you can adjust changes via the RF remote controller. It is very useful for light box advertisement, stage light, house decorating and more.
Technical parameters
- Working temperature: -20-60°C
- Supply voltage: DC12V
- External dimension: L94 W58 H26 mm
- Net weight: 205 g
- Gross weight: 235 g
- Rated power: 2.2W
- Output: two SPI signals
DMX-DRC1606IC ( DMX Controller for Color Chasing Ribbon Flex ) This controller is the DMX controller used for our 5050 SMD Color Chasing Ribbon Flex. It can achieve functions such as fast changing, comet trail, gradual changing, and color wash.
Technical parameters
- Working temperature: -20-60°C
- Supply voltage: DC5V
- Output: two groups SPI signal, DMX signal
- External dimension: L123 W72 H27 mm
- Packing size: L145 W95 H50 mm
- Net weight: 100 g
- Gross weight: 130 g
- Static power consumption: <1W
SNL-300 SNL-300 Multifunction Full-color Controller is dedicated to control color changes of Led lights with 4-pin 3-loop cables (common anode). This compact device has a small screen, built-in a DMX512 decoder (3 addresses) & up to 34 color changing modes. It can run stand alone or networking with multi controllers, or work with a PC which have DMX editor software through a signal connector. Specifications:
- Power input: DC12V~DC24V
- Current output: 8A/ch×3
- Power output: 1~600W(24V) 1~300W(12V)
- Protection: Auto overload protection
- Mode: 34 color skipping, gradual, flash, chasing etc.
- Changing speed: 0-100 levels
- Static Dimming Level: 0-100 levels per RGB
- 3rd Commnication Port: DMX512/1990
- Dimension: L190×W120×H50mm
- Package size: L210×W160×H65mm
- Weight(GW): 1kg
Features:
- Built-in a 2X16 bit LCD screeneasy to set up parameters.
- 3 RGB channels, maximum 8A per channel; supports full load working.
- 34 color changing modes, can choose each mode’s speed separately.
- 100 levels of color dimming per RGB, can select static LED color and adjust brightness at will.
- Can edit auto running mode, & choose a specific pattern.
- Support universal DMX512 protocol, remote control available with extra DMX512 devices.
- Can control hi-power & low power led lamps with 4-pin, 3 loops.
- Standalone used or networking with SNL-390 to have an unlimited power extension
- Auto store setups, with off-power protection.
- Restore default parameter(ex-factory parameter).
|
|
|
|
RF4B-3CH-11 
